Modify the Anchor Properties - Designer - Foundation 23.1 - Foundation 23.1 - Brainware - external

To modify the anchor properties, complete the following steps.

1. On the document, right-click the anchor and then click Properties.
2. In the Anchor Properties dialog box, complete any of the following substeps.
   • In the Name field, modify the anchor name.
   • To set the distance of the anchor to the left edge of the page, modify the value in the Left field.
   • To set the distance of the anchor to the top edge of the page, modify the value in the Top field.
   • To set the width of the anchor, modify the value in the Width field.
   • To set the height of the anchor, modify the value in the Height field.
3. To specify for which geometric feature the anchor is looking for, from the Anchor Type list, select one of the following types and then modify the properties of the anchor type, if applicable.

   • Fit to image corner.

     You can position the anchor anywhere on the document page.

   • Fit to Text.

     For more information, see About the Anchor Type Fit to Text.

   • Fit to line.

   • Fit to box corner.

   • Fit to "T".

   • Fit to cross.

4. Click the Learn button.

   A message will indicate learning was successful and the learned geometric feature will be indicated by dotted green lines. If unsuccessful, modify the position or size of the anchor and then click Learn again.

5. Click OK.
   Note: Any change to the anchor position or size removes learning.