To configure the QualitiySoft Barcode engine, complete the following steps.
- In the Field OCR Settings Properties dialog box, under Recognition Type, select Barcode.
- From the Available Engines list, select QualitySoft Barcode.
-
On the
General tab, complete the following substeps as required.
- To specify the maximum number of bar codes to recognize within the reading zone, modify the value in the Max. number of barcodes field. The default value is 10. Reducing the number increases the recognition speed.
- To specify the bar code minimum length in characters, modify the value in the Min. number of chars field.
- To specify the bar code maximum length in characters, modify the value in the Max. number of chars field.
- Select one or more
Orientation values and complement the
Orientation settings with the max.
Skew settings to get most fast and accurate results. Note: Clearing an Orientation value causes the engine to ignore bar codes with that angle during processing.
- To triggers an additional bar code
detection algorithm which improves the bar code detection, select
Intensive Search. Note: This setting reduces the processing speed.
- To define the maximum angle deviation from
the configured main orientations, select one of the max.
Skew values. Note: Setting a small value increases recognition speed.
-
On the
Types tab, select the required bar codes.
Note: Excluding bar code types which your documents don’t contain increases the recognition speed.
- Click Apply and then click OK.