OCR - Application Enabler - Foundation 23.1 - Foundation 23.1 - Ready - OnBase - Essential - Premier - Standard - external - Premier - Essential - Standard

Application Enabler

Platform
OnBase
Product
Application Enabler
Release
Foundation 23.1
License
Premier
Essential
Standard

The OCR setting must be used if you are configuring Application Enabler to use OCR with this application.

  1. Select which OCR engine should be used.
    • To use the native OCR engine, select Use Local OCR Engine.

    • To use the Data Capture Server OCR engine, select Use Data Capture Server OCR Engine.

    Note:

    Select Enable ClearType Compatibility Mode or use the Data Capture Server OCR engine if the application you are enabling uses ClearType fonts.

    Note:

    Additional licensing and configuration is required in order to use the Data Capture Server for OCR processing. See Data Capture Server for information.

  2. If you selected Use Local OCR Engine, configure the Monochrome Threshold value, if necessary. The Monochrome Threshold value is internally used by the local OCR engine. For most applications, the default value of 1 will be sufficient. Modify this value only when the default value does not work for the screens in your application.
  3. If you selected Use Local OCR Engine, and the application you are enabling uses ClearType fonts, select Enable ClearType Compatibility Mode.
  4. If you selected Use Data Capture Server OCR Engine, configure the following settings:
    • Server Address - Enter the server address for the Data Capture Server. The server address must be the net.tcp address to the Data Capture Server, for example:

      net.tcp://localhost:9050/Hyland.DataCapture.ServiceManager/service

    • OCR Format - Select the OCR format to be used.

      Note:

      For information on configuring OCR formats, refer to the Full-Page OCR module reference guide.

  5. Click OK when you have completed configuration.