Download Protocol - COLD/ERM - Foundation 24.1 - Foundation 24.1 - Ready - OnBase - Premier - external - Standard - Essential - Premier - Standard - Essential - OnBase/COLD/ERM/Foundation-24.1/COLD/ERM/Appendix-Using-The-PCL-Printset-Processor/Printset-Processor-Configuration/Process-Settings-Configuration/The-Processing-Tab/Download-Protocol - 2024-08-01

COLD/ERM
Platform
OnBase
Product
COLD/ERM
Release
Foundation 24.1
License
Premier
Standard
Essential

Select the radio button in this section that describes how the processing workstation will access the import file.

By default, the No Download radio button is selected.

Download Protocol Option

Description

No Download

Select if you do not download the files you will process (i.e., the files are accessible locally on your computer, LAN or WAN).

This option is selected by default.

Note:

When using FTP with the No Download option, preprocessors cannot be used unless they have been created with the ability to access files via FTP.

FTP Download
Note:

To use the FTP Download option, the build-specific mzftp.dll file must be installed in the OnBase root directory. This DLL requires the wininet.dll file, which is typically installed with Microsoft® Internet Explorer 4.01 or higher.

Select this radio button if you are using File Transfer Protocol to obtain files for processing. Ensure that the format of the FTP server's URL is specified correctly. For example:

FTP Server\:Port\\FTP Download Path\

Where FTP Server is replaced with the name of the FTP server or IP address and FTP Download Path is replaced with the name of the FTP directory on that server.

Secure File Transfer Protocol (SFTP) is not supported for use with the Printset Processor.

Note:

Depending on the FTP server you are connecting to, the syntax of your FTP server's URL may be different.

Tip:

The port is normally 21, but your solution may be different.

Tip:

For performance or character length reasons, it is recommended that you replace the server name with its IP address. Try some benchmarks, and if name resolution causes a performance degradation, then make the corresponding change in the Configuration module, under Disk Groups | Volume Information.

  1. Place a \ in the Default Directory field. The Default File Name field must be set to the name of the file to be processed.

  2. Click Connect and enter your FTP User Name and FTP Password. If your FTP server requires a FQDN, the user name must be entered in the form:

    user name@domain name

  3. Click Save.

Note:

Before processing files, the files must be accessible from the workstation.

Socket Download

This option can only be used with the Check Image Processing module. See the Check Image Processing documentation for more information.

Socket Direct

This option can only be used with the Check Image Processing module. See the Check Image Processing documentation for more information.

Tape Drive

This option can only be used with the Check Image Processing module. See the Check Image Processing documentation for more information.