To configure a Document Type button to be automatically selected when a document printed by the Virtual Print Driver is captured by Express Scanning, add set the autoselect setting to true (autoselect=”true”) in the BUTTON sub-element associated with the button.
Only one Document Type button per location should be configured to use the autoselect setting. If the autoselect setting is enabled for multiple buttons configured to display for a single location, the captured documents are associated with the first button configured to use the autoselect setting (i.e., the Document Type button configured to use the autoselect setting that is listed first in the master configuration file).
-
If you are using a Print to OnBase solution in non-interactive mode, you must enable the autoselect setting for one Document Type button at each location.
If the autoselect setting is not enabled for any Document Type buttons in a non-interactive Print to OnBase solution, then the captured documents are associated with the first button listed (i.e., the Document Type button with the BUTTON sub-element that is listed first in the master configuration file).
-
If you are using a Print to OnBase solution in interactive mode, you can enable the autoselect setting for one Document Type button at each location, but it is not required.
For more information on the autoselect setting and the BUTTON sub-element, see The BUTTON Sub-Element.