Specifying the Default Image Scale - Front Office Scanning - Foundation 23.1 - Foundation 23.1 - Ready - OnBase - Premier - external - Standard - Essential - Premier - Standard - Essential

Front Office Scanning

Platform
OnBase
Product
Front Office Scanning
Release
Foundation 23.1
License
Premier
Standard
Essential

You can specify how all documents are displayed, by default, in the Working window:

Note:

The default display behavior can be overridden at the Document Type level. For more information, see Configuring General Document Options at the Document Type Level.

  1. In the Front Office Scanning configuration file, locate the ScanOptions element.
  2. Within the ScanOptions element, locate the imagescale setting. If this value is not present, add it to the ScanOptions element.
  3. Depending on how you want the documents to be displayed, set the imagescale setting to one of the following value:
    • FitWidth. Documents in the Working window are displayed as Fit to Width by default.

    • FitHeight. Documents in the Working window are displayed as Fit to Height by default.

    • FitImage. Documents in the Working window are displayed as Fit in Window by default.

    • FullSize. Document in the Working window are displayed as their actual size.

    For example: imagescale="fitwidth"

    Tip:

    For more information on the Front Office Scanning configuration file's ScanOptions element and its settings, including the imagescale setting, see The ScanOptions Element.

  4. Save and close the configuration file.