Download Protocol - HL7 Module - Foundation 23.1 - Foundation 23.1 - Ready - OnBase - Essential - Premier - Standard - external - Essential - Standard - Premier

HL7 Module
Platform
OnBase
Product
HL7 Module
Release
Foundation 23.1
License
Essential
Standard
Premier

Select the radio button in this section that describes how the processing workstation will access the import file. By default, the No Download option is selected.

Option

Description

No Download

Select if the files to be processed do not need to be downloaded to the processing workstation (that is, the files are already accessible locally on your computer, LAN, or WAN).

Note:

When using FTP with the No Download option, preprocessors cannot be used unless they have been created with the ability to access files via FTP.

FTP Download
Note:

The FTP Download option requires the build-specific mzftp.dll file to be located in the same folder as the OnBase executables. This DLL requires the wininet.dll file, which is typically installed with Microsoft® Internet Explorer.

Select this radio button if you are using File Transfer Protocol to obtain files for processing. Ensure that the format of the FTP server's URL is specified correctly. For example:

FTP Server\:Port\\FTP Download Path\

Where FTP Server is replaced with the name of the FTP server or IP address and FTP Download Path is replaced with the name of the FTP directory on that server.

Secure File Transfer Protocol (SFTP) is not supported for use with HL7.

Note:

The syntax of the FTP server's URL may vary depending on the FTP server you are connecting to.

Tip:

The port is normally 21, but your solution may be different.

Tip:

For performance or character length reasons, it is recommended that you replace the server name with its IP address. Try some benchmarks, and if name resolution causes a performance degradation, then make the corresponding change in the Configuration module, under Disk Groups | Volume Information.

  1. Place a \ in the Default Directory field. The Default File Name field must be set to the name of the file to be processed.

  2. Click Connect and enter your FTP User Name and FTP Password. If your FTP server requires a FQDN, the user name must be entered in the form:

    user name@domain name

  3. Click Save.

Note:

Before processing, the files must be accessible from the workstation.

Socket Download

A TCP/IP socket can be used if it is the only way to capture the HL7 data.

Select the Socket Download option in specific instances to allow a connection that downloads information to the processing workstation. Enter the specification number of the socket download connection in the Socket Number field.

Note:

Before processing, the files must be accessible from the workstation.

Socket Direct

Active for Check Image Processing only.

Tape Drive

Active for Check Image Processing only.