Fixing Charts in Review for HL7-Created Facilities - HL7 Module - Foundation 23.1 - Foundation 23.1 - Ready - OnBase - Essential - Premier - Standard - external - Premier - Standard - Essential

HL7 Module
Platform
OnBase
Product
HL7 Module
Release
Foundation 23.1
License
Premier
Standard
Essential

After you configure a facility that has been created by HL7, OnBase can reevaluate the charts that are in Charts Requiring Review because the facility was not configured.

If a chart is in Charts Requiring Review only because the facility was not configured, then the following procedure will remove the chart from the Charts Requiring Review queue. If a chart requires review for other reasons, then the chart remains in the Charts Requiring Review queue, where it must be manually removed.

  1. Select the facility from the Medical Facility Configuration dialog box.
  2. Click Fix Charts. This button is available only after the facility has been configured.
    OnBase displays a message indicating the number of charts that require review because the selected facility was created by HL7.
  3. Click OK. If any charts require review because the selected facility was created by HL7, OnBase evaluates their review status.

    The time it takes to evaluate the charts depends on the number of charts requiring review. When the evaluation is complete, OnBase displays a message indicating whether all of the affected charts have been cleared from review.

    Note:

    If any of the affected charts are still in Charts Requiring Review, then you must review and correct them manually. If any of these charts is associated with an Admit Type that was created by HL7, you may be able to fix them through Admit Type Configuration.

  4. Click OK to return to the Medical Facility Configuration dialog box.