The following name/value pairs are used to configure a Destination object for forwarding services:
|
Name |
Value |
|---|---|
|
FriendlyName |
Enter a name for the forwarding destination. |
|
Port |
Enter the TCP port to which the service forwards incoming traffic from the source. |
|
Host |
Enter the DNS name or IP address of the host to which the service forwards traffic. |
|
KeepAliveTimeout |
This setting sends network traffic to the configured endpoint at the configured interval if no other traffic is being sent over that endpoint. For example, if you set this setting to 5, and there is no activity over the port for 5 minutes, Message Engine will send a keep alive packet to the configured endoint every 5 minutes. Note: It is recommended to set the value to 1
minute less than any configured firewall timeout.
|
|
Security |
See Security. |