Configuring Print Format Settings - Configuring Print Format Settings - OnBase - OnBase for Meditech with ODA - OnBase/OnBase-for-Meditech-with-ODA/English/Foundation-22.1/OnBase-for-Meditech-with-ODA/Configuration/Integrating-With-Meditech/Configuring-and-Managing-the-Hyland-Multiserver-Printserver/Configuring-the-Printserver/Configuring-Print-Format-Settings - English - Foundation 22.1

OnBase for Meditech with ODA
Platform
OnBase
Product
OnBase for Meditech with ODA
Release
Foundation 22.1
License
Premier
Standard
Essential
ft:lastPublication
2022-09-21T13:53:00.924000
ft:locale
en-US

By default, the Printserver does not respect the orientation specified in a Document Type's configured print format. To configure the Printserver to respect the orientation specified in a Document Type's default print format, complete the following process:

  1. Open the print_server.exe.config file in a text editor.
  2. Locate the following setting: 
    <add key="EnableOnBaseDocumentPrintFormat" value="false" />
  3. Set the value to true to configure the Printserver to respect the orientation specified in OnBase Document Type print formats.
    Note:

    Only Portrait and Landscape print formats are supported. The Auto Orientation print format is not supported.