Fixing Charts in Review for HL7-Created Admit Types - Patient Window - Foundation 23.1 - Foundation 23.1 - Ready - OnBase - external

Patient Window
Platform
OnBase
Product
Patient Window
Release
Foundation 23.1
License

After you configure a Admit Type that has been created by HL7, OnBase can reevaluate the charts that are in Charts Requiring Review because the Admit Type was not configured.

If a chart is in Charts Requiring Review only because the Admit Type was not configured, then the following procedure will remove the chart from the Charts Requiring Review queue. If a chart requires review for other reasons, then the chart remains in the Charts Requiring Review queue, where it must be manually removed.

  1. Select the Admit Type from the Admit Type Configuration dialog box.
  2. Click Fix Charts. This button is available only after the Admit Type has been configured.

    OnBase displays a message indicating the number of charts that require review because the selected Admit Type was created by HL7.

  3. Click OK. If any charts require review because the selected Admit Type was created by HL7, OnBase evaluates their review status.

    The time it takes to evaluate the charts depends on the number of charts requiring review. When the evaluation is complete, OnBase displays a message indicating whether all of the affected charts have been cleared from review.

    Note:

    If any of the affected charts are still in Charts Requiring Review, then you must review and correct them manually. If any of these charts is associated with a facility that was created by HL7, you may be able to fix them through Medical Facility Configuration.

  4. Click OK to return to the Admit Type Configuration dialog box.