Configure a virtual server for Perceptive Content Server - Configure a virtual server for Perceptive Content Server - Perceptive Content Server Install Guide - Foundation 24.1 - Foundation 24.1 - Ready - Perceptive Content - external - Perceptive-Content/Perceptive-Content-Server-Install-Guide/Foundation-24.1/Perceptive-Content-Server-Install-Guide/Install-Perceptive-Content/Assemble-and-configure-a-server-farm-for-Perceptive-Content-Server/Configure-a-virtual-server-for-Perceptive-Content-Server - 2024-04-02

Perceptive Content Server Install Guide
Platform
Perceptive Content
Product
Perceptive Content Server Install Guide
Release
Foundation 24.1
License
ft:locale
en-US

To configure a virtual server for Perceptive Content Server, complete the following steps.

  1. Click the Config tab.
  2. In the Load Balancing menu, select Virtual Servers.
  3. Add a new virtual server by clicking the + (plus) symbol.
    Note: This requires administrative permissions on the Cisco ACE device.
  4. In the Provide a virtual server IP address field, enter a virtual server IP address. This is the address clients use to connect to one of the machines in the server farm.
  5. In the Virtual Server list, select VLAN interface for the virtual server.
  6. In the Load Balance list, select Load Balance for the primary action.
  7. Use the server farm you configured in the "Configure the server farm" section as the server farm.